NOCO GENPRO10X3 · on-board charger for three boat batteries, 12V 3 x 10A IP68
Three isolated 10A banks in a fixed, sealed charger: every 12V battery of up to 230Ah gets its own charge, whether lead-acid or lithium with BMS.
- ✓ 3 isolated 10A banks (30A)
- ✓ Up to 230Ah on each bank
- ✓ IP68 waterproof housing
- ✓ AGM, lithium and repair modes
- ✓ Recovers batteries from 0V
NOCO GENPRO10X3 · on-board charger for three boat batteries, 12V 3 x 10A IP68
On a boat with three good-sized batteries, each one tends to drain at its own pace. With a shared charger, the fullest one calls the shots and the others fall short. The NOCO GENPRO10X3 connects every battery to its own isolated 10A bank, with a single mains plug for the lot.
Each bank handles 12V batteries of up to 230Ah, lead-acid (wet, gel, MF, EFB, AGM, calcium) or lithium with BMS, LiFePO4 included. You get 12V, AGM, lithium and repair modes, detection from 1V and a force mode for batteries at 0V.
It screws down in whatever position fits best and the sealed IP68 housing is made for the sea. You can leave it connected for as long as the boat is laid up.
How to use it, step by step
- 1. Place the charger near the batteries and fix it with the 2 screws in the box.
- 2. Before plugging into the mains, run each bank to its battery: red to positive (+), black to negative (−).
- 3. Plug the charger in and select each bank's mode for its battery: 12V, AGM or lithium.
- 4. Let it work while the boat is moored; each battery is charged and maintained on its own.
- 5. To disconnect any battery, unplug the charger from the mains first.
Features
- ✓ Three isolated 10A banks working independently (30A in total, 450W max.).
- ✓ Each bank charges 12V batteries of up to 230Ah; 100Ah from 50% in about 7h.
- ✓ Lead-acid (wet, gel, MF, EFB, AGM, calcium) and 12V lithium with BMS, including LiFePO4.
- ✓ 12V, AGM, lithium and repair modes; detection from 1V and force mode at 0V.
- ✓ Sealed IP68 housing, mounts in any orientation with an anti-vibration back plate.
- ✓ Temperature compensation, permanent connection without overcharging and last-mode memory.
- ✓ Diagnostics for reverse polarity, faulty battery and excess voltage.
Technical data
| Mains input voltage | 100-240 VAC, 50-60 Hz |
|---|---|
| Output power | 450 W max. |
| Charging banks | 3 |
| Current per bank | 10 A (12 V) |
| Total charging current | 30 A |
| Battery voltage | 12 V |
| Battery chemistries | Lead-acid (wet, gel, MF, calcium, EFB, AGM) and 12V lithium with BMS (incl. LiFePO4) |
| Battery capacity | Up to 230 Ah per bank; maintains all battery sizes |
| Charging modes | 12V, 12V AGM, 12V Lithium, Repair and Force |
| Low-voltage detection | 1 V (Force Mode: 0 V) |
| Back current drain | < 0.5 mA |
| Operating temperature | -20 °C to +40 °C |
| Housing protection | IP68 |
| Cooling | Natural convection |
| DC cable length | approx. 1.83 m |
| Approx. charging time (50% depth of discharge) | 20 Ah: 1.5 h · 40 Ah: 3 h · 100 Ah: 7 h · 230 Ah: 17.3 h |
| Dimensions (L x W x H) | 267 x 188 x 71 mm |
| Weight | 5.81 kg |
In the box
- ✓ GENPRO10X3 on-board charger
- ✓ 2 x #8 27 mm self-tapping screws
- ✓ User guide and warranty
-
Brand
-
ReferenceBCASA-NOCO-GENPRO10X3
-
MPNGENPRO10X3
Your payment details are encrypted.
To Spain and Portugal. 14-hour urgent service.
No additional cost.