NOCO GEN5X2 · on-board charger for boats with two batteries, 12V 2 x 5A IP68
If your boat runs two batteries, this fixed charger looks after each one separately: 2 isolated 5A banks, 12V and up to 120Ah per bank.
- ✓ 2 isolated 5A banks (10A)
- ✓ Up to 120Ah per bank
- ✓ IP68 waterproof for marine use
- ✓ Lead-acid and lithium with BMS
- ✓ Mounts in any position
NOCO GEN5X2 · on-board charger for boats with two batteries, 12V 2 x 5A IP68
Plenty of boats carry one battery for starting the engine and another for lights, the bilge pump or electronics. If either runs low, the weekend plan goes out of the window. The NOCO GEN5X2 is fitted permanently on board and charges both at once, each through its own isolated 5A bank, so neither depends on the other.
Each bank takes 12V batteries of up to 120Ah, lead-acid (wet, gel, MF, EFB, AGM or calcium) or lithium with BMS, LiFePO4 included. There is a repair mode, it detects batteries from 1V and a force mode handles ones sitting at 0V.
The sealed IP68 housing can be screwed down in any orientation. You can leave it connected all winter: it won't overcharge and it corrects the charge for temperature.
How to use it, step by step
- 1. Fix the charger on board with the 2 supplied screws, near the batteries and in whatever position suits you.
- 2. With no mains power, connect each bank to its battery: red lead to positive (+), black lead to negative (−).
- 3. Plug the charger in and set each bank to the mode for its battery (12V, AGM or lithium).
- 4. Let it work while the boat is laid up; each bank looks after its own battery.
- 5. Always unplug the charger from the mains before touching the connections.
Features
- ✓ Two isolated 5A banks working independently (10A in total, 145W max.).
- ✓ Each bank charges 12V batteries of up to 120Ah.
- ✓ Handles lead-acid (wet, gel, MF, EFB, AGM, calcium) and 12V lithium with BMS, including LiFePO4.
- ✓ 12V, AGM, lithium and repair modes, plus force mode for 0V batteries.
- ✓ IP68 waterproof housing, mounts in any orientation with an anti-vibration back plate.
- ✓ Temperature compensation and permanent connection with no risk of overcharging.
- ✓ Diagnostics for reverse polarity, faulty battery and excess voltage.
Technical data
| Mains input voltage | 100-240 VAC, 50-60 Hz |
|---|---|
| Output power | 145 W max. |
| Charging banks | 2 |
| Current per bank | 5 A (12 V) |
| Total charging current | 10 A |
| Battery voltage | 12 V |
| Battery chemistries | Lead-acid (wet, gel, MF, calcium, EFB, AGM) and 12V lithium with BMS (incl. LiFePO4) |
| Battery capacity | Up to 120 Ah per bank; maintains all battery sizes |
| Charging modes | 12V, 12V AGM, 12V Lithium, Repair and Force |
| Low-voltage detection | 1 V (Force Mode: 0 V) |
| Back current drain | < 0.5 mA |
| Operating temperature | -20 °C to +40 °C |
| Housing protection | IP68 |
| Cooling | Natural convection |
| DC cable length | approx. 1.83 m |
| Approx. charging time (50% depth of discharge) | 20 Ah: 3 h · 40 Ah: 6 h · 100 Ah: 15 h · 120 Ah: 18 h |
| Dimensions (L x W x H) | 163 x 119 x 53 mm |
| Weight | 1.89 kg |
In the box
- ✓ GEN5X2 on-board charger
- ✓ 2 x #8 27 mm self-tapping screws
- ✓ User guide and warranty
-
Brand
-
ReferenceBCASA-NOCO-GEN5X2
-
MPNGEN5X2
Your payment details are encrypted.
To Spain and Portugal. 14-hour urgent service.
No additional cost.