NOCO GENIUSPRO50 · charger for big motorhome and boat battery banks 6/12/24V 50A
The GENIUSPRO25's big brother: 50A on 6 and 12V and 25A on 24V for large battery banks, with a power supply mode and a 10A mode.
- ✓ 50A on 6/12V, 25A on 24V
- ✓ Up to 2000Ah (1000Ah on 24V)
- ✓ 200Ah from 50% in about 3h
- ✓ 10A mode and 12/24V supply
- ✓ 60A ANL fuse
NOCO GENIUSPRO50 · charger for big motorhome and boat battery banks 6/12/24V 50A
A motorhome with a generous lithium bank, a boat with several batteries in parallel or a 24V truck: with capacities like these, every hour of charging counts. The NOCO GENIUSPRO50 delivers 50A on 6V and 12V and 25A on 24V; according to the manufacturer, 200Ah from half charge in about 3 hours.
It charges lead-acid (wet, gel, MF, EFB, AGM, calcium) and lithium with BMS, LiFePO4 included, up to 2000Ah on 6/12V and 1000Ah on 24V. For batteries up to 400Ah or for maintenance there is a 10A mode, and repair is available on all three voltages.
It also works as a 12V and 24V power supply for ECU programming and diagnostics. If your batteries are more modest, the GENIUSPRO25 offers 25A.
How to use it, step by step
- 1. Find a dry, covered spot with air around it: the housing is IP20 and has a cooling fan.
- 2. Before plugging the charger in, connect the red clamp to positive (+) and the black one to negative (−).
- 3. Plug it in and select the voltage (6, 12 or 24V) and chemistry: lead-acid, AGM or lithium.
- 4. For batteries up to 400Ah, or to leave it maintaining, choose the 10A mode.
- 5. When done, unplug from the mains and release the black clamp before the red one.
Features
- ✓ 750W maximum output: 50 amps with 6 or 12-volt batteries and half that, 25, with 24-volt ones.
- ✓ Capacity covered: a maximum of 2000Ah with 6/12V and 1000Ah with 24V; as a maintainer there is no size limit.
- ✓ Lead-acid (wet, gel, MF, EFB, AGM, calcium) and lithium with BMS, including LiFePO4.
- ✓ 12V and 24V power supply for ECU programming and diagnostics.
- ✓ For smaller batteries (400Ah maximum) or to leave it maintaining, the current drops to 10A; it repairs sulphated batteries at any of its three voltages.
- ✓ Detection from 1V, force mode at 0V and temperature compensation from -20°C to +50°C.
- ✓ 3m silicone DC lead with nylon braid, flexible down to -40°C; 60A ANL fuse.
- ✓ IP20 housing with fan cooling, 2.27kg; EVA case included.
Technical data
| Mains input voltage | 100-240 VAC, 50-60 Hz |
|---|---|
| Output power | 750 W max. |
| Charging current | 50 A (6V, 12V) / 25 A (24V) |
| Battery voltage | 6V, 12V and 24V |
| Battery chemistries | Lead-acid (wet, gel, MF, calcium, EFB, AGM) and lithium with BMS (LiFePO4) |
| Battery capacity | 6/12V: up to 2000 Ah · 24V: up to 1000 Ah; maintains all battery sizes |
| Charging modes | Lead-acid, AGM and Lithium (6/12/24V), Repair (6/12/24V), 12V and 24V Supply, 10 A mode and Force |
| Low-voltage detection | 1 V (6V, 12V, 24V); Force Mode: 0 V |
| Back current drain | < 0.5 mA |
| Operating temperature | -20 °C to +50 °C |
| Housing protection | IP20 |
| Cooling | Forced air |
| DC cable length | 3 m (8 AWG) |
| Fuse | ANL 60 A |
| Approx. charging time (50% depth of discharge) | 6/12 V: 50 Ah: 0.75 h · 100 Ah: 1.5 h · 200 Ah: 3 h · 500 Ah: 6 h · 1000 Ah: 15 h |
| Dimensions (L x W x H) | 316 x 176 x 97.5 mm |
| Weight | 2.27 kg |
In the box
- ✓ GENIUSPRO50 charger
- ✓ Clamps with interchangeable connectors
- ✓ 3 m DC cable
- ✓ 60 A ANL fuse
- ✓ 2 self-tapping screws
- ✓ EVA case
- ✓ User guide
-
Brand
-
ReferenceBCASA-NOCO-GENIUSPRO50
-
EAN131210000619525
-
MPNGENIUSPRO50
Your payment details are encrypted.
To Spain and Portugal. 14-hour urgent service.
No additional cost.