NOCO GEN5X1 · waterproof on-board charger for your boat, 12V 5A, 1 bank
A fixed, fully sealed charger that keeps your boat battery ready to go: 12V, 5A and up to 120Ah, lithium batteries with BMS included.
- ✓ IP68 waterproof, fixed on board
- ✓ One 5A output for 12V
- ✓ Lead-acid and lithium with BMS
- ✓ Batteries up to 120Ah
- ✓ Force mode for 0V batteries
NOCO GEN5X1 · waterproof on-board charger for your boat, 12V 5A, 1 bank
When your boat sits at the mooring between trips, the battery slowly drains, and on the day you want to head out the engine won't turn over. The NOCO GEN5X1 lives on board to stop that happening: screw it in wherever suits you, at any angle, and its sealed IP68 housing is built for the marine environment.
It charges one 12V battery of up to 120Ah at 5A, whether lead-acid (wet, gel, MF, EFB, AGM or calcium) or lithium with BMS, LiFePO4 included. It recognises deeply drained batteries from 1V and has a force mode for ones that have dropped to 0V.
Day to day, just leave it plugged in: it won't overcharge however long it stays connected, it adjusts to the temperature and it remembers your last mode.
How to use it, step by step
- 1. Pick a spot on board near the battery and fix the charger with the 2 supplied screws; any orientation is fine.
- 2. With the mains disconnected, attach the red lead to the positive (+) terminal and the black lead to the negative (−).
- 3. Plug the charger in and select the mode that matches your battery: 12V, AGM or lithium.
- 4. Leave it connected while the boat is moored; it keeps the battery topped up without overcharging.
- 5. To remove it, unplug from the mains first, then undo the battery leads.
Features
- ✓ Fully sealed housing with IP68 protection, designed for marine conditions.
- ✓ Mounts in any orientation, even upside down, with an anti-vibration back plate.
- ✓ One 5A output for 12V batteries up to 120Ah (72W max.).
- ✓ Works with lead-acid (wet, gel, MF, EFB, AGM, calcium) and 12V lithium with BMS, including LiFePO4.
- ✓ 12V, AGM, lithium and repair modes, the last one for sulphated or stratified batteries.
- ✓ Detects batteries from 1V and offers a force mode for 0V batteries.
- ✓ Temperature-compensated charging; can stay connected with no risk of overcharging.
- ✓ DC cable of approx. 1.83m and 2 screws for fixing.
Technical data
| Mains input voltage | 100-240 VAC, 50-60 Hz |
|---|---|
| Output power | 72 W max. |
| Charging banks | 1 |
| Charging current | 5 A (12 V) |
| Battery voltage | 12 V |
| Battery chemistries | Lead-acid (wet, gel, MF, calcium, EFB, AGM) and 12V lithium with BMS (incl. LiFePO4) |
| Battery capacity | Up to 120 Ah; maintains all battery sizes |
| Charging modes | 12V, 12V AGM, 12V Lithium, Repair and Force |
| Low-voltage detection | 1 V (Force Mode: 0 V) |
| Back current drain | < 0.5 mA |
| Operating temperature | -20 °C to +40 °C |
| Housing protection | IP68 |
| Cooling | Natural convection |
| DC cable length | approx. 1.83 m |
| Approx. charging time (50% depth of discharge) | 20 Ah: 3 h · 40 Ah: 6 h · 100 Ah: 15 h · 120 Ah: 18 h |
| Dimensions (L x W x H) | 117 x 74 x 48 mm |
| Weight | 0.84 kg |
In the box
- ✓ GEN5X1 on-board charger
- ✓ 2 x #8 27 mm self-tapping screws
- ✓ User guide and warranty
-
Brand
-
ReferenceBCASA-NOCO-GEN5X1
-
MPNGEN5X1
Your payment details are encrypted.
To Spain and Portugal. 14-hour urgent service.
No additional cost.