NOCO GENPRO10X4 · on-board charger for boats with four batteries, 12V 4 x 10A IP68
Four batteries, four banks: this fixed, waterproof charger gives 10A to each 12V battery of up to 230Ah, lead-acid or lithium with BMS.
- ✓ 4 isolated 10A banks (40A)
- ✓ Up to 230Ah per bank
- ✓ IP68 waterproof, fixed fit
- ✓ Lead-acid and lithium with BMS
- ✓ Repair and force modes
NOCO GENPRO10X4 · on-board charger for boats with four batteries, 12V 4 x 10A IP68
If your boat has four batteries to look after, the last thing you want is to keep moving clamps from one to another every time you come back to port. The NOCO GENPRO10X4 has four isolated 10A banks, each with its own battery, and you connect it to the mains just once.
Each bank takes 12V batteries of up to 230Ah, lead-acid (wet, gel, MF, EFB, AGM, calcium) or lithium with BMS, LiFePO4 included. You can pick 12V, AGM or lithium mode on each one, and there is a repair mode plus a force mode for batteries at 0V.
It is the model with the most outputs among the NOCO on-board chargers in this selection. It screws down in any orientation, the housing is sealed to IP68 and it can stay plugged in permanently.
How to use it, step by step
- 1. Allow space for its 287 x 211mm footprint near the batteries and fix it with the 2 supplied screws.
- 2. With no mains power, connect each of the four banks to its battery: red to positive (+), black to negative (−).
- 3. Plug the charger in and set each bank to its battery's mode: 12V, AGM or lithium.
- 4. Leave it connected while the boat isn't in use; each bank maintains its battery without overcharging.
- 5. Before handling any connection, unplug the charger from the mains.
Features
- ✓ Four isolated 10A banks working independently (40A in total, 600W max.).
- ✓ 12V batteries of up to 230Ah on each bank.
- ✓ Lead-acid (wet, gel, MF, EFB, AGM, calcium) and 12V lithium with BMS, including LiFePO4.
- ✓ 12V, AGM, lithium and repair modes; detects batteries from 1V and force mode at 0V.
- ✓ IP68 waterproof housing, mounts in any orientation with an anti-vibration back plate.
- ✓ Temperature compensation and permanent connection without risk of overcharging.
- ✓ Measures 287 x 211 x 71mm and weighs 7.03kg.
Technical data
| Mains input voltage | 100-240 VAC, 50-60 Hz |
|---|---|
| Output power | 600 W max. |
| Charging banks | 4 |
| Current per bank | 10 A (12 V) |
| Total charging current | 40 A |
| Battery voltage | 12 V |
| Battery chemistries | Lead-acid (wet, gel, MF, calcium, EFB, AGM) and 12V lithium with BMS (incl. LiFePO4) |
| Battery capacity | Up to 230 Ah per bank; maintains all battery sizes |
| Charging modes | 12V, 12V AGM, 12V Lithium, Repair and Force |
| Low-voltage detection | 1 V (Force Mode: 0 V) |
| Back current drain | < 0.5 mA |
| Operating temperature | -20 °C to +40 °C |
| Housing protection | IP68 |
| Cooling | Natural convection |
| DC cable length | approx. 1.83 m |
| Approx. charging time (50% depth of discharge) | 20 Ah: 1.5 h · 40 Ah: 3 h · 100 Ah: 7 h · 230 Ah: 17.3 h |
| Dimensions (L x W x H) | 287 x 211 x 71 mm |
| Weight | 7.03 kg |
In the box
- ✓ GENPRO10X4 on-board charger
- ✓ 2 x #8 27 mm self-tapping screws
- ✓ User guide and warranty
-
Brand
-
ReferenceBCASA-NOCO-GENPRO10X4
-
MPNGENPRO10X4
Your payment details are encrypted.
To Spain and Portugal. 14-hour urgent service.
No additional cost.