NOCO GEN5X3 · on-board charger for boats with three batteries, 12V 3 x 5A IP68
For the boat with three batteries: a single waterproof charger with 3 independent 5A banks, each one for a 12V battery of up to 120Ah.
- ✓ 3 banks of 5A (15A in total)
- ✓ Up to 120Ah on each bank
- ✓ Sealed IP68 housing
- ✓ Lead-acid and lithium with BMS
- ✓ Repair mode
NOCO GEN5X3 · on-board charger for boats with three batteries, 12V 3 x 5A IP68
With three batteries on board, charging them one at a time is a chore and there is always one that gets left behind. The NOCO GEN5X3 solves it with a single fixed unit: three isolated 5A banks, each working on its own, so all three are ready when you cast off.
Each output charges a 12V battery of up to 120Ah, whether lead-acid (wet, gel, MF, EFB, AGM, calcium) or lithium with BMS, LiFePO4 included. It offers 12V, AGM, lithium and repair modes, and brings batteries back from 1V, or even 0V with force mode.
It screws down in whatever position you like, inside a sealed IP68 housing, and stays plugged in without overcharging, adjusting the charge to the temperature.
How to use it, step by step
- 1. Screw the charger in an easy-to-reach spot on the boat, close to the batteries, using the 2 screws provided.
- 2. With the mains disconnected, run each bank to its battery: red to positive (+), black to negative (−).
- 3. Connect the charger to the mains and set each bank to the mode its battery needs: 12V, AGM or lithium.
- 4. Leave it connected throughout the mooring season; each battery gets its own charge.
- 5. When you're done, unplug from the mains first and then remove the leads from each battery.
Features
- ✓ Three isolated 5A banks working independently (15A in total, 220W max.).
- ✓ 12V batteries of up to 120Ah per bank.
- ✓ Lead-acid (wet, gel, MF, EFB, AGM, calcium) and 12V lithium with BMS, including LiFePO4.
- ✓ 12V, AGM, lithium and repair modes for sulphated or stratified batteries.
- ✓ Detection from 1V and force mode for 0V batteries.
- ✓ IP68 waterproof housing, mounts in any orientation with an anti-vibration back plate.
- ✓ Can stay connected permanently and remembers the last mode used.
Technical data
| Mains input voltage | 100-240 VAC, 50-60 Hz |
|---|---|
| Output power | 220 W max. |
| Charging banks | 3 |
| Current per bank | 5 A (12 V) |
| Total charging current | 15 A |
| Battery voltage | 12 V |
| Battery chemistries | Lead-acid (wet, gel, MF, calcium, EFB, AGM) and 12V lithium with BMS (incl. LiFePO4) |
| Battery capacity | Up to 120 Ah per bank; maintains all battery sizes |
| Charging modes | 12V, 12V AGM, 12V Lithium, Repair and Force |
| Low-voltage detection | 1 V (Force Mode: 0 V) |
| Back current drain | < 0.5 mA |
| Operating temperature | -20 °C to +40 °C |
| Housing protection | IP68 |
| Cooling | Natural convection |
| DC cable length | approx. 1.83 m |
| Approx. charging time (50% depth of discharge) | 20 Ah: 3 h · 40 Ah: 6 h · 100 Ah: 15 h · 120 Ah: 18 h |
| Dimensions (L x W x H) | 180 x 145 x 56 mm |
| Weight | 2.61 kg |
In the box
- ✓ GEN5X3 on-board charger
- ✓ 2 x #8 27 mm self-tapping screws
- ✓ User guide and warranty
-
Brand
-
ReferenceBCASA-NOCO-GEN5X3
-
MPNGEN5X3
Your payment details are encrypted.
To Spain and Portugal. 14-hour urgent service.
No additional cost.