NOCO GENPRO10X1 · on-board charger for your boat's big battery, 12V 10A IP68
When your boat battery is a big one, this fixed, sealed charger gives it 10A: 12V batteries up to 230Ah, lead-acid or lithium with BMS.
- ✓ 10A on one 12V output
- ✓ Batteries up to 230Ah
- ✓ IP68 waterproof, fixed mounting
- ✓ 100Ah at half charge in about 7h
- ✓ AGM, lithium and repair modes
NOCO GENPRO10X1 · on-board charger for your boat's big battery, 12V 10A IP68
A sailing boat or motor launch running a fridge, plotter and lights usually carries a generous house battery, and with a small charger topping it up takes all night and then some. The NOCO GENPRO10X1 delivers 10A to a 12V battery of up to 230Ah: according to the manufacturer, a 100Ah battery at half charge is back in around 7 hours.
It accepts lead-acid (wet, gel, MF, EFB, AGM, calcium) and lithium with BMS, LiFePO4 included, with dedicated modes and a repair mode. It detects batteries from 1V and has a force mode for ones that have fallen to 0V.
It stays screwed down on board in any position, inside a sealed IP68 housing, and can remain plugged in: no overcharging, and the charge is corrected for temperature.
How to use it, step by step
- 1. Find a space near the battery and fix the charger with the 2 supplied screws, in whichever orientation you like.
- 2. With the charger unplugged, connect the red lead to positive (+) and the black lead to negative (−).
- 3. Plug into the mains and select the mode for your battery: 12V, AGM or lithium; repair mode is for tired batteries.
- 4. You can leave it connected while the boat is in port: it holds the charge without overdoing it.
- 5. To take it out, unplug the mains before removing the battery leads.
Features
- ✓ One 10A output for 12V batteries up to 230Ah (150W max.).
- ✓ Approximate time from 50% discharge: 40Ah in 3h, 100Ah in 7h and 230Ah in 17.3h.
- ✓ Lead-acid (wet, gel, MF, EFB, AGM, calcium) and 12V lithium with BMS, including LiFePO4.
- ✓ 12V, AGM, lithium and repair modes; force mode for 0V batteries.
- ✓ IP68 waterproof housing, mounts in any orientation with an anti-vibration back plate.
- ✓ Temperature compensation, permanent connection without overcharging and last-mode memory.
- ✓ DC cable of approx. 1.83m; 2 fixing screws included.
Technical data
| Mains input voltage | 100-240 VAC, 50-60 Hz |
|---|---|
| Output power | 150 W max. |
| Charging banks | 1 |
| Charging current | 10 A (12 V) |
| Battery voltage | 12 V |
| Battery chemistries | Lead-acid (wet, gel, MF, calcium, EFB, AGM) and 12V lithium with BMS (incl. LiFePO4) |
| Battery capacity | Up to 230 Ah; maintains all battery sizes |
| Charging modes | 12V, 12V AGM, 12V Lithium, Repair and Force |
| Low-voltage detection | 1 V (Force Mode: 0 V) |
| Back current drain | < 0.5 mA |
| Operating temperature | -20 °C to +40 °C |
| Housing protection | IP68 |
| Cooling | Natural convection |
| DC cable length | approx. 1.83 m |
| Approx. charging time (50% depth of discharge) | 20 Ah: 1.5 h · 40 Ah: 3 h · 100 Ah: 7 h · 230 Ah: 17.3 h |
| Dimensions (L x W x H) | 145 x 122 x 71 mm |
| Weight | 1.81 kg |
In the box
- ✓ GENPRO10X1 on-board charger
- ✓ 2 x #8 27 mm self-tapping screws
- ✓ User guide and warranty
-
Brand
-
ReferenceBCASA-NOCO-GENPRO10X1
-
MPNGENPRO10X1
Your payment details are encrypted.
To Spain and Portugal. 14-hour urgent service.
No additional cost.