NOCO GENPRO10X2 · 2-bank on-board boat charger, 12V 2 x 10A IP68
Two isolated 10A outputs, one per battery, in a waterproof charger that stays fixed on board: 12V and up to 230Ah per bank, lead or lithium with BMS.
- ✓ 2 isolated 10A banks (20A)
- ✓ Up to 230Ah per bank
- ✓ Sealed to IP68 for boats
- ✓ Lead-acid and lithium with BMS
- ✓ Force mode for 0V batteries
NOCO GENPRO10X2 · 2-bank on-board boat charger, 12V 2 x 10A IP68
If your boat has a starter battery and a decent-sized house bank, you need both to recover properly after every trip. The NOCO GENPRO10X2 gives each of them its own isolated 10A bank, so every battery gets its charge without interfering with the other.
Each bank takes 12V batteries of up to 230Ah, lead-acid (wet, gel, MF, EFB, AGM, calcium) or lithium with BMS, LiFePO4 included, with 12V, AGM, lithium and repair modes. It starts from 1V and has a force mode for batteries at 0V.
It goes in with two screws, accepts any orientation and its housing is waterproof to IP68. Once it is fitted, leave it plugged in: it won't overcharge and it adjusts the charge to the temperature.
How to use it, step by step
- 1. Mount the charger near both batteries and fix it with the 2 supplied screws.
- 2. With the mains disconnected, connect each bank to one battery: red to positive (+), black to negative (−).
- 3. Plug the charger in and choose the mode for each bank's battery (12V, AGM or lithium).
- 4. Leave it connected between trips; each bank works separately and won't overcharge.
- 5. If you need to touch the connections, unplug the charger from the mains first.
Features
- ✓ Two isolated 10A banks working independently (20A in total, 300W max.).
- ✓ 12V batteries of up to 230Ah on each bank.
- ✓ Lead-acid (wet, gel, MF, EFB, AGM, calcium) and 12V lithium with BMS, including LiFePO4.
- ✓ 12V, AGM, lithium and repair modes, detection from 1V and force mode at 0V.
- ✓ Sealed IP68 housing, mounts in any orientation with an anti-vibration back plate.
- ✓ Temperature compensation and permanent connection without risk of overcharging.
- ✓ DC cables of approx. 1.83m.
Technical data
| Mains input voltage | 100-240 VAC, 50-60 Hz |
|---|---|
| Output power | 300 W max. |
| Charging banks | 2 |
| Current per bank | 10 A (12 V) |
| Total charging current | 20 A |
| Battery voltage | 12 V |
| Battery chemistries | Lead-acid (wet, gel, MF, calcium, EFB, AGM) and 12V lithium with BMS (incl. LiFePO4) |
| Battery capacity | Up to 230 Ah per bank; maintains all battery sizes |
| Charging modes | 12V, 12V AGM, 12V Lithium, Repair and Force |
| Low-voltage detection | 1 V (Force Mode: 0 V) |
| Back current drain | < 0.5 mA |
| Operating temperature | -20 °C to +40 °C |
| Housing protection | IP68 |
| Cooling | Natural convection |
| DC cable length | approx. 1.83 m |
| Approx. charging time (50% depth of discharge) | 20 Ah: 1.5 h · 40 Ah: 3 h · 100 Ah: 7 h · 230 Ah: 17.3 h |
| Dimensions (L x W x H) | 206 x 147 x 74 mm |
| Weight | 3.27 kg |
In the box
- ✓ GENPRO10X2 on-board charger
- ✓ 2 x #8 27 mm self-tapping screws
- ✓ User guide and warranty
-
Brand
-
ReferenceBCASA-NOCO-GENPRO10X2
-
MPNGENPRO10X2
Your payment details are encrypted.
To Spain and Portugal. 14-hour urgent service.
No additional cost.