NOCO GENIUSPRO25 · charger for big motorhome, boat and truck batteries 6/12/24V 25A
Workshop-grade charging for your home garage: 6, 12 and 24V, 25A, lead-acid and lithium, with a stable power supply and a gentle 5A mode.
- ✓ 25A on 6/12V, 12.5A on 24V
- ✓ Up to 1000Ah (500Ah on 24V)
- ✓ 12/24V power supply mode
- ✓ 5A mode for small batteries
- ✓ 3m leads flexible to -40°C
NOCO GENIUSPRO25 · charger for big motorhome, boat and truck batteries 6/12/24V 25A
A motorhome with a decent battery bank, a boat running 24V or the family truck: when batteries get big, a household charger falls short. The NOCO GENIUSPRO25 charges at 25A on 6V and 12V and at 12.5A on 24V; according to the manufacturer, 100Ah from half charge takes about 3 hours.
It takes lead-acid (wet, gel, MF, EFB, AGM, calcium) and lithium with BMS, LiFePO4 included, up to 1000Ah on 6/12V and 500Ah on 24V. Its 5A mode looks after batteries up to 200Ah or maintains them, and there are repair modes on all three voltages.
If you like tinkering with your car, its ripple-free 12V and 24V power supply is suitable for ECU programming and diagnostics.
How to use it, step by step
- 1. Set it up indoors in a dry place: the housing is IP20 and the fan needs room to breathe.
- 2. With the charger unplugged, red clamp to positive (+) and black clamp to negative (−) of the battery.
- 3. Plug it in and choose the voltage (6, 12 or 24V) and battery type: lead-acid, AGM or lithium.
- 4. For small batteries use the 5A mode; for work on the vehicle's electronics, the power supply mode.
- 5. When finished, unplug first, then remove the black clamp followed by the red one.
Features
- ✓ Up to 375W of power: 25 amps for 6 or 12-volt batteries and 12.5 for 24-volt ones.
- ✓ Recharges banks of at most 1000Ah at 6/12V or 500Ah at 24V, and maintains larger batteries.
- ✓ Lead-acid (wet, gel, MF, EFB, AGM, calcium) and lithium with BMS, including LiFePO4.
- ✓ Stable 12V (25A) and 24V (12.5A) power supply for ECU programming and diagnostics.
- ✓ The gentle 5A mode handles batteries of 200Ah or less, or keeps them maintained; it repairs sulphated batteries at 6, 12 and 24V.
- ✓ Detection from 1V, force mode at 0V and last-mode memory.
- ✓ 3m silicone DC lead with nylon braid, flexible down to -40°C; replaceable 30A ANL fuse.
- ✓ IP20 housing with fan cooling; EVA case included.
Technical data
| Mains input voltage | 100-240 VAC, 50-60 Hz |
|---|---|
| Output power | 375 W max. |
| Charging current | 25 A (6V, 12V) / 12.5 A (24V) |
| Battery voltage | 6V, 12V and 24V |
| Battery chemistries | Lead-acid (wet, gel, MF, calcium, EFB, AGM) and lithium with BMS (LiFePO4) |
| Battery capacity | 6/12V: up to 1000 Ah · 24V: up to 500 Ah; maintains all battery sizes |
| Charging modes | Lead-acid, AGM and Lithium (6/12/24V), Repair (6/12/24V), 12V and 24V Supply, 5 A mode and Force |
| Power supply mode | 12 V (25 A) / 24 V (12.5 A) |
| Low-voltage detection | 1 V (6V, 12V, 24V); Force Mode: 0 V |
| Back current drain | < 0.5 mA |
| Operating temperature | -20 °C to +50 °C |
| Housing protection | IP20 |
| Cooling | Forced air |
| DC cable length | 3 m (8 AWG) |
| Fuse | ANL 30 A |
| Approx. charging time (50% depth of discharge) | 6/12 V: 25 Ah: 0.75 h · 50 Ah: 1.5 h · 100 Ah: 3 h · 200 Ah: 6 h · 500 Ah: 15 h |
| Dimensions (L x W x H) | 236 x 130 x 76 mm |
| Weight | 1.22 kg |
In the box
- ✓ GENIUSPRO25 charger
- ✓ Clamps with interchangeable connectors
- ✓ 3 m DC cable
- ✓ 30 A ANL fuse
- ✓ 2 self-tapping screws
- ✓ EVA case
- ✓ User guide
-
Brand
-
ReferenceBCASA-NOCO-GENIUSPRO25
-
EAN131210000619518
-
MPNGENIUSPRO25
Your payment details are encrypted.
To Spain and Portugal. 14-hour urgent service.
No additional cost.