Lemania Energy T11 · battery, starter and alternator tester 12/24V with printer

Lemania Energy T11 · battery, starter and alternator tester 12/24V with printer

When a car is reluctant to start, the battery is not always to blame: it could be an alternator that is not charging or a tired starter motor. The T11 helps you find out.

The Lemania Energy T11 tests 12 V batteries, lead-acid or lithium from 100 to 2000 CCA, as well as 12 and 24 V starter motors and alternators. It also runs a 12 V ground test, picks up faulty cells and works to standards such as CCA, EN, DIN, JIS and SAE.

It prints the report, shares results via USB or QR code and is operated through an LCD screen and touch panel. It needs no internal battery, guards against reversed polarity and comes in its own carry case.

How to use it, step by step

• 1.  With the engine off, connect the red clamp to the battery positive and the black to negative.
• 2.  Pick the test on screen: battery, starter, alternator or ground.
• 3.  Enter the standard and the rating from your battery label (for example, its CCA).
• 4.  Read the result and print it or save it with the QR code.
• 5.  Remove the clamps, black first, and put the T11 back in its case.

Features

• ✓  12 V battery test and 12 V ground test.
• ✓  Starter motor and alternator test at 12 and 24 V.
• ✓  Lead-acid and lithium batteries from 100 to 2000 CCA.
• ✓  Standards CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE and GB; detects faulty cells.
• ✓  Built-in printer, USB connection and results via QR code.
• ✓  LCD screen and touch panel.
• ✓  No internal battery, with reverse polarity protection.
• ✓  175 cm lead; 230 × 100 × 40 mm and 0.72 kg; carry case included.

Technical data

In the box

• ✓  T11 tester
• ✓  Carry case